Субуфер Monitor Audio Gold W12

- 5%
Цена при нас: 4826.00 лв.
Официална цена: 5080.00 лв.
Гаранция: 5 г.
Цената е за: Брой
+
Безплатна доставка

За страната доставка от 1 до 3 работни дни с куриерска компания Еконт, след потвърждение на поръчката.

Активен субуфер със затворен обем и 12-инчов, насочен напред говорител.

 

За любителите на дълбок и рафиниран бас Gold W12 е идеален партньор за всяка аудио система. Всеки саундтрак е чудесно допълнен от дълбокия и балансиран бас от този първокласен субуфер. 

Gold W12 ползва 12 инчов (305 mm) говорител с дълъг ход, подкрепен с два пасивни излъчвателя Auxiliary Bass Radiators (ABR) и захранен с 600 W Class D усилвател. Мощта и мащаба, които тази комбинация може да възпроизведе се усещат също толкова лесно, колкото се и чуват, благодарение на възможността на Gold W12 да достигне впечатляващите 20 Hz.

Благодарение на системата за акустична калибрация на Monitor Audio - Automatic Position Correction (APC), субуферът може да се представя превъзходно дори и при не съвсем оптимално разполагане. Множество настройки, както и запаметени предварително режими на звучене, са достъпни чрез контролния панел на субуфера, както и чрез специално разработения от Monitor Audio ‘SubConnect’ софтуер. 

Основни характеристики

  • Субуфер с три говорителя, от които два 200 mm ABR (Auxiliary Bass Radiators) пасивни излъчвателя
  • Ударен бас до 20 Hz
  • 12 инчов говорител с ултра дълъг ход и :
    • C-CAM профил на мембраната
    • – 75 mm диаметър на звуковата бобина 
    • – Тройно окачване за ултимативна линейност - осигурява контрол при висока мощност и ход на мембраната
  • Мощен 600 Watt Hypex Class-D Усилвател
  • DSP процесор
  • APC (Automatic Position Correction) – система за автоматична акустична калибрация с микрофон 
  • Контролен панел на горната част на субуфера - за лесен и удобен достъп
  • USB за връзка със ‘SubConnect’ приложението и фърмуерни ъпдейти

 

 

Гаранция - 5 години

Цената е за брой.

System Format

Long-throw 12" driver featuring ‘dished’ C-CAMcone. Dual 200 mm ABR(auxiliary bass radiator). Front baffle 36 mm, cabinet 25 mm MDF construction with internal bracing and sealed amplifier compartment

Lower Frequency Limit

-3 dB @ 25 Hz / -10 dB @ 20 Hz (Free Field). Music preset (Default): -3 dB @ 19 Hz / -10 dB @ 16 Hz (In Room). Assignable Low Frequency Limit Protection Filter: -3 dB @ 12 Hz

Upper Frequency Limit

-3 dB @ 150 Hz

Drive Unit Complement

1 x 12" C-CAM subwoofer driver featuring triple suspension and 3" long throw voice coil

Linear Driver Excursion

19 mm Peak to Peak,
Total displacement 1.6 Litres

Amplifier Output

600 W

Amplifier Classification

Class D with high current Switch mode power supply (SMPSU)

DSP

50 MIPS DSP Core giving 512 instructions per sample, 138 dB of dynamic range and 56-bit double precision processing, dynamically updated by an up to 50 MHz MCU

Digital Conversion

24 bit/up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core

LED UI Control Panel

Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim & Mute, LPF, Phase, Preset Select

Global Settings (via SubConnect)

Display Brightness (0-100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment (Power On / Off or Preset select), Input gain (Master -80 to +20 dB, Trim -11 to +11 dB, Mute), Phase (0 – 360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On / Off (Enable Signal Sense, Always On, Time to off 5 – 240 mins)

User Presets (via SubConnect)

4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope Order (-12 or -24 dB/Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6 dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On / Off), Night Mode (On / Off)

User Equalisation (via SubConnect)

6 fully controllable EQ filters and 4 default filters with gain offset per preset, Voreinstellungen: Flat / Music / Movie / Impact

Room Correction EQ

6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnectwith up to microphone 6 positions (default 2)

Night Mode

Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic range reduction lowering the level of loud sections

Phase Control

0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees

Low Pass Filter Alignment

2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz

Auto Sensing Input Requirements

Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes

Digital Volume Level

-11 to +11 dB in 1 dB increments, via the control panel. -80 to +20 in 1 dB increments, via SubConnect application

IR Remote Control Code

Supplied IR remote. Front facing IR receiver with red LED indication

SubConnect (PC Application)

Windows (7 onwards) (32/64 bit) compatible setup application available from the Monitor Audio website. Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off-site setup

Audio Input/Outputs

LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA). LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)

Connection

12 V Trigger in (3.5 mm mono mini-jack, 6 V threshold), assignable to On/Off or Pre-set change, 3.5 mm Microphone input jack (mic supplied), RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5 mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update

Electrical Certifications

CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)

Mains Input Voltage

100 – 120 Vac ~60Hz / 220 – 240 Vac ~50/60 Hz (Manually selected)

Power Consumption

Maximum 600 W, Standby <0.5 W (ErP compliance)

Fuse Type

20 mm T8AL 250 VAC

Weight (unpacked)

26.98 kg (59 lb 8.3 oz)

External Dimensions (Including Amp, Drivers and Terminals (H x W x D))

413 x 410 x 433.5 mm (161/4 x 161/8 x 171/16")

External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))

445 x 410 x 433.5 mm (171/2 x 161/8 x 171/16")

Производител:
Monitor Audio

Все още няма ревюта. Защо не напишете първото?

Напишете ревю